how to boost your connection smartbro users..!!!

Mga boss binigay lang po sakin ng kakilala ko..sana po mapakinabangan ng iba nating katinapay...
sinubukan ko naman po sya at ok naman po...

Smart BRO Plan 999 wrote:
Smart Bro Wireless Broadband Internet is offered at Plan 999 with a
speed of up to 384 kbps. With Smart Bro Plan 999 you get a [Only
registered and activated users can see links. ] broadband
connectionthat’s up to 7x faster than dial-up, as well as other Value
Added Services for your Smart BRO connection, changing the way you surf
the net.
^ Yeah that's what their advertisements say. But did you know that the
default speed that is offered to us by Smart Bro is only limited to 256
kbps? Therefore we got about 128 kbps short of what we had expected
from their service.

Hmm.. so why not do something about it. Why dont we change the default
speeds (download and upload) to up to 500 kbps! Yup, we can do that.
Simply Amazing right? Heheh. So just read on to know how..

But before anything else..
Disclaimer: The tutorial below was written by me FoRsAkEnKiD. Please
take note that I am not forcing you to do what I am about to teach. I
will not be held responsible for anything that might happen to the
materials of the users involved during the process. Proceeding through
the process of the tutorial means that you have acknowledged my
disclaimer statement.

PART 1: Preparations

WARNING: During the process, you will be disconnected from theinternet
but of course you'll be able to get back. So I suggest you copy and
paste this tutorial on notepad for a safer reference, just in case.

Follow the steps:
1. Go to control panel and then onto Network Connections. You should
see your Local Area Connection. Right click on it and click Properties.

2. A new window pops-up, which says "Local Area Connection Properties".
On the General tab, there should be a box which contains a list with
checkboxes beside them. Scroll down to the bottom and you should see
the internet protocol (TCP/IP) item. Double click it.

3. Another window pops-out. It says "Internet Protocol (TCP/IP)
Properties" and you should be on the General tab. There are two options
there enabled by default: Obtain an Ip address automatically and Obtain
DNS server address automatically. Now read carefully for this one:
- Click on Use the following IP address option. Enter these data:
- IP address: 10.20.30.40
- Subnet mask: 255.0.0.0
- Default [Only registered and activated users can see links. ]leave it blank
- Click on Use the following DNS Server addresses:
- Preferred DNS server: leave it blank
- Alternate DNS server: leave it blank
After you entered correctly all the data, press Ok.

4. You are back at the Local Area Connection Properties window. Press
Ok to apply the changes. Wait for a moment for the changes to take
effect. By this time you will be disconnected from the internet. But
dont worry, you'll be able to be back of course (Just refer to PART 4
below to know how to get back to the internet).

PART 2: The Canopy IP Address Quest

Now you need to know your Canopy IP Address. There are two ways I know of:

-> Method 1 (The Safe Way):
1. Go to Start -> Run -> cmd.exe. On the command promt, type arp
-a (take note of the space after the word arp). The comman promt will
display several IP addresses. Example:

C:\Documents and Settings\giluk_no_jutsu>arp -a
Interface: 10.20.30.40 --- 0x2
Internet Address Physical Address Type
10.0.0.1 0a-00-3e-f7-de-2d dynamic
10.247.222.45 0a-00-3e-f7-de-2d dynamic

So my Canopy IP Address would be 10.247.222.45.

Note: For some reasons, some people have encountered problems regarding
the above method. If that method fails and doesnt seem to work for you,
please proceed to the next method...

-> Method 2 (The Not-So-Safe Way):
EDITED (June1,2007): The site for converting you ESN code into your
Canopy IP Address has either been deleted or moved by its owner. So
please use Method 1 instead. Thanks.
This method is one of the most effective ways to get your Canopy IP address, but its a bit risky.

1. What you need to do is to climb up to your rooftop to reach your
Smart Bro antenna (Yeah you need to climb up ). On the back side of the
antenna, you should see the antenna's ESN code (you should have a
combination of 12 characters composed of numbers and alphabets). Copy
the code. As for minors, please ask for adults to climb the roof for
you .

2. Once you have taken note of you antenna's ESN code, go to this site:
[Only registered and activated users can see links. ] to convert your
ESN code into a Canopy IP Address. The resulting IP address is your
Canopy IP add so take note of it (better yet, i suggest you memorize
it). You're done.


There, now you have your Canopy IP Address. Hooray for you! Now let's get our hands real dirty as we go to the next part..

PART 3: Into the Forbidden Domain we Hack!

Note: Make sure you have done the set-up on Part 1 above before proceeding.

1. Open your web browser and enter your Canopy IP address on the address bar. You will be brought to the Canopy Homepage.

2. On the left side of the Canopy page, you should see a navigation box. Click Configuration.

3. Click on the Quality of Service (QoS) Tab. You should see your
Bandwitdh Settings. Take a look at your Sustained Uplink Data Rate and
Sustained Downlink Data Rate. By default they should be both at 256.
See? Those are your default download and upload limits. Kinda sucks
right?

4. Alright, so listen well. Change both of the Uplink and Downlink
values to 500. Actually you can set the values to any number you like
as long as their total would be 1000 (eg: you can have your downlink:
600 and uplink: 400, or you can have downlink: 700 and uplink: 300).
However, The recommended value for both uplink and downlink rates is
both at 500. So I suggest you have the recommended value as well. Click
the Save Changes button.

5. The screen should say Reboot Required. So press the Reboot button.
By this time, your Local Area Connection icon on your tray area
(botton-right side of your desktop should have an X mark on it. Just
wait for a while until that X mark disappears. That's it.

PART 4: Getting Back Online

The last thing you need to do is to connect back to the internet.

1. So go back to Control Panel, and then onto Network Connection. You
should see your Local Area Connection. Right click on it and click
Properties.

2. A new window pops-up, which says "Local Area Connection Properties".
On the General tab, there should be a box which contains a list with
checkboxes beside them. Scroll down to the bottom and you should see
the Internet Protocol (TCP/IP) item. Double click it.

3. Another window pops-out. It says "Internet Protocol (TCP/IP)
Properties" and you should be on the General tab. Now click on Obtain
IP address automatically and Obtain [Only registered and activated
users can see links. ]NS Server automatically. Press Ok.

4. You're back at the Local Area Connection Properties window. Again Press Ok. Wait for a moment for the changes to take effect.

5. Open yourWeb Broser and try to test your speed at speedtest.com or
testmy.net to confirm your new download and upload speeds. You can also
try going to YouTube and watch the buffer speed go zoom zoom zoom!


E2 video tutoral:

can i have the website where can i acquire my canopy address? big thanks in advance.